Barcode Labels
• Inventory Barcode Labels Report:
Barcode labels can be printed on labels of most sizes. Specialty barcode labels are also supported. Frame labels are compatible with Arch Crown Labels and Datamax printers. For more information, visit Arch Crown website at http://www.archcrown.com or call Miriam at 1-800-526-8353.
• To print Barcode Labels:
1. Follow the item menu sequence … File | Inventory | Barcode Labels.
2. Specify the search criteria for the labels you wish to print then click the Search Button.
3. In the Labels Column enter the amount of labels you would like to print for each item.
4. Click Apply, this will take you to the Barcode Labels Preview Screen.
5. The Start Pos Box lets you indicate at which label you would like to start printing.
6. Click Print Button to print.
• Arch Crown Supported Labels:
|
TT306 OVERALL SIZE: 7/16" X 3 1/2" PRINTABLE AREA: 7/16" X 1 3/4" |
|
|
TT307 OVERALL SIZE: 9/16" X 4 7/16" PRINTABLE AREA: 9/16" X 2 1/2" |
|
|
TT313 SIZE: 1" X 1 1/4" |
|
|
TT316 SIZE: 1 1/8" X 1 3/16" |
|
|
TT364 OVERALL SIZE: 1 1/4" X 2 9/16" PRINTABLE AREA: 1 1/4" X 1 1/2" |
|
|
TT366 OVERALL SIZE: 3/8" x 2 3/4" PRINTABLE AREA: 3/8" X 1 1/2" |
|
|
TT368 OVERALL SIZE: 1 5/16" X 2" PRINTABLE AREA: 5/16" X 1/2" ON EACH SIDE |
|
|
LT335 LT335 - PAPER LASER TAGS FOR LASER AND INK JET PRINTERS PERFERATED LASER TAGS SHEETED FOR BOTH LASER AND INK JET PRINTERS. LASER TAG SHEETS ARE 6 ACROSS BY 8 DEEP (48 TAGS PER 8 1/2" X 11" SHEET |
|
When printing to Datamax printers set the labels in the printer as detailed in the table below. Also the printing speed should be marked to 1.00 in/sec or slower for the printer’s label sensor to detect the label beginning. These settings can be changed under the Datamax printer printing preferences. To view or change these settings click on Windows Start menu | Settings | Control Panel | Printers and Faxes option. Right-click on the Datamax Printer and select Printing Preferences. Under Page Setup Tab specify these settings for the label you are using. If the barcode prints beyond the right or left side of the label click the Edit Button to change the
Exposed Liner Widths.
|
Label |
Width (inch) |
Height (inch) |
Exposed Liner Width Left (inch) |
|
TT306 |
3.68 |
0.72 |
0.13 |
|
TT307 |
4.17 |
0.69 |
0.13 |
|
TT313 |
4.00 |
1.00 |
0.13 |
|
TT316 |
1.19 |
1.50 |
0.13 |
|
TT364 |
2.63 |
1.38 |
0.13 |
|
TT366 |
3.13 |
0.72 |
0.13 |
|
TT368 |
2.13 |
1.5 |
0.13 |
Under the Options Tab it is very important that the speeds are set to the minimum i.e. 1.00 in/sec
Printing Preferences – Options Tab:
|
Print Speed: 1.00 in/sec |
Feed: 1.00 in/sec |
|
Slew: 1.00 in/sec |
Backup: 1.00 in/sec |
• Altering Printing Quality:
1. Quality of printed image can be changed by changing the Print Head Temperature under Options tab.
2. If the print is too dark or too light you can change the print head temperature. Higher temperatures may darken or sharpen the image. However, too high of a temperature setting may blur the image, or even melt the ribbon onto the label stock, so this value should be adjusted gradually and within the limits suggested by the manufacturer for the stock and/or ribbon in use. Please refer to Datamax printer driver help file to read more about the print head temperature.
• Skipping Labels:
If after printing a label the paper advances blank labels the ribbon may not have been placed correctly blocking the sensor's view of the labels, so it cannot tell where the label edge is thus feeding out the extra labels. Ribbon goes OVER the small silver roller, UNDER the black composite piece, and OVER the other silver roller.
• Barcodes are printing over the label edge? The settings can be easily adjusted in the printer preferences of the printer. To adjust:
3. Click on Windows Start Menu | Control Panel | Printers & Faxes.
4. Right-click on Datamax Printer and select Printing Preferences.
5. Under Page Setup Tab click Edit and reduce Expose Liner Width Left to move the label to left or vice-versa
6. The label size Width should be 4.00 inch and Height 6.00 inch.
See Also: